Type: 310

ORANGE GRIP (SU-GL310-*)

Adding polyester to natural cotton makes it possible to obtain a light supple liner. The natural rubber protects the hand from abrasion cuts, puncturing and extends the life of the glove. This coating also ensures excellent grip on both dry and moist objects, thanks to the rough finish.

On this palm coated glove the knuckles remain free ensuring good dexterity, and the back of the hand is ventilated to reduce perspiration.

• Design Features

• The glove’s anatomical shape facilitates movement.

• The seamless liner prevents irritation.

• Use – General work glove & Climbing

Type: 451

THERMO (SU-GL451-*)

The mixture of acrylic/cotton/polyester in the liner combines warmth, light weight and suppleness. The natural rubber coating on the palm and fingertips protects the hand from abrasion, cutting and puncturing, and prevents the glove from tearing.

The rough finish allows slippery objects to be gripped firmly. This is an ideal glove for all work ain cold rooms or in cold outdoor conditions.

• Design Features

• Designed for cold conditions: latex-coated acrylic/cotton/polyester liner

• The ventilated back of the hand reduces perspiration.

• The glove’s anatomical shape facilitatesmovement.

• The seamless liner prevents irritation.

• Use – General work glove

Type: 330

RE-GRIP (SU-GL330-*)

Adding polyester to natural cotton makes it possible to obtain a light supple liner. The natural rubber protects the hand from abrasion cuts, puncturing and extends the life of the glove. This coating also ensures excellent grip on both dry and moist objects, thanks to the rough finish.

The palm coating with reinforced thumb and index finger area, as this area is vulnerable in the event of repeated impacts from objects being handled, is protected by a double layer of latex that also prolongs the lifetime of the glove.

• Design Features

• The glove’s anatomical shape facilitates movement.

• The seamless liner prevents irritation.

• Use – General work glove & Rigging work

Type: 545

DYNEEMA NITRILE (SU-GL545-*)

These gloves are designed for precision tasks where mechanical hazards are present. Dyneema, a fine and supple fibre made from ultra-high-density polyethylene, ensures level 4 protection against abrasion and tearing and level 2 or 3 cut-resistance. The two different types of coating leave the joints of the hand free so as not to hinder movement and enhance the performance of the Dyneema knit on the palm and fingertips.  

The glove’s grey liner doesn’t show the dirt and is coated with an ultra-grippy but supple nitrile coating that increases its oil and chemical resistance. In addition, the back of the hand is ventilated, making the glove comfortable to wear.

• Design Features

• The glove’s anatomical shape facilitates movement.

• The seamless knit prevents irritation.

• Use – Climbing glove

Type: 370

ASSEMBLY GRIP (SU-GL370-*)